Most of us face tire fitting problems because we do not know much about it. Though auto manufacturers provide a handbook with vehicles to educate users about tire care and car maintenance, they may still need expert help. Especially when it comes to fixing and fitting tires, hiring a professional becomes essential to avoid problems. Proper fitting is critical not only for the safety and performance but also to reduce excessive wear and tear. Ignoring this guide guideline will severely affect the vehicle. It will minimize car performance and increase maintenance expenses.
Below I am sharing few essential tips, which will help you to avoid car tyre fitting problems.
Religiously Follow The Mentioned Tire Specifications
Don’t forget to check the handbook for speed rating and load ratio for tires fitted in your vehicle. Remember these values when buying a new pair for your car. Never compromise on these numbers to protect your vehicle from expensive damages. Going beyond the extreme limits is always harmful to the integrity of the vehicle.
Always Maintain Accurate Tire Pressure
Before you fit a new pair of tires, ensure to check the pressure. It has to be correct neither under-inflated nor over-inflated. Both conditions are harmful to vehicles. Driving with low pressure can lead to rapid wear and tear and increase fuel consumption. In contrast to that, over-inflated tires lose their traction. They get deformed due to excessive pressure. Overinflation makes the tire more susceptible for damages, especially if they encounter potholes. Moreover, it also makes driving harsh and noisy.
Learn To Read Markings On The Rubber
Automobile manufacturers always fix original tires from genuine brands. Don’t forget to check the given Original Equipment Manufacturer (OEM) contract to understand design and brand details of tires. Note down the sectional width of rubber to select tires with accurate inflation.
Double Check Alignment
Tire alignment must be thoroughly checked during the fitting as any carelessness or negligence can damage the ridgeline of the tyre. Periodical alignment checks at authorised service centres are essential to ensure the safety of vehicle and passengers during the drive.
Fix Wobbling Issues With Proper Fitting
Wobbling is due to built-in instability during tire manufacturing. Though it can be resolved with adequate load distribution via tire fitting machine, if ignored, it will produce imbalanced centrifugal pressure, which results in wobbling.
Check For The Unusual Appearance
No matter how much time you may have to spend to pick a good looking pair of tires for your vehicle, don’t forget to check the appearance after fitting and routine check. If newly fitted pieces look different, it will be a warning sign that you have chosen a wrong pair. Immediate replacement is the only solution to avoid problems in future.
Inspect For Cambered/Convexity Issues
Cambered tires are due to convexity on the tire surface. It can be either due to design defect during manufacturing, or it can be the result of poor tire fitting. Regardless of the reason curved rubber will result in reduced life. It leads to wear and tear on the external side.
Endnote: Car tyre fitting problems must be avoided. Ignorance can lead to severe mechanical and performance issues. Improper fitting is a constant threat to the safety and should be fixed at the reliable auto service centre.